Home » railML newsgroups » railML.infrastructure » [railML3.3] Signal combinations
[railML3.3] Signal combinations [message #3112] Sun, 20 August 2023 13:44 Go to previous message
Jörg von Lingen is currently offline  Jörg von Lingen
Messages: 87
Registered: March 2016
Member
Dear all,

especially with UC Scematic track plan the question arose how to model signals with different functions. For most infrastructure managers these signals are represented on the plan with different symbols depending on the parts installed on that pole. Here I suggest to make use of the functional information placed in the interlocking subschema.
With the latest extensions in the schema there can be several <signalIL> and <signalIndicator> referring to the same physical <signalIS>. From these relation the signal function (in interlocking domain), the possible aspects and the number of installed lamps [1] can be retrieved.
As illustration I have attached a sketch showing the reletions for a German Ks-signal as example. A signal with a main, distant and shunting signal on the same pole can be moddelled in similar way.

Dr.-Ing. Jörg von Lingen - Interlocking scheme coordinator
railML.org (Registry of Associations: VR 5750)
Phone Coordinator: +49 351 87759 40; railML.org: +49 351 47582911
Altplauen 19h; 01187 Dresden; Germany www.railml.org

[1] Proposal for signal lamps https://www.railml.org/forum/index.php?t=msg&th=786& start=0&
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: [railML 3] railway signal modeling
Next Topic: [railML3] electrification is IS, RS and CO
Goto Forum:
  


Current Time: Sat Jun 22 02:04:07 CEST 2024