Home » railML newsgroups » railml.interlocking » [railml3] Signal types and functions (See IS forum)
Re: [railml3] Signal types and functions [message #3199 is a reply to message #3198] Sun, 03 March 2024 08:42 Go to previous message
Jörg von Lingen is currently offline  Jörg von Lingen
Messages: 87
Registered: March 2016
Member
This is a good remark. Until now the signalIL@function did not consider such a
signal/marker board placed at a buffer stop. Thus we shall add "trackEnd" for
such function. The proposed "end" might be ambiguous.


Best regards,
Joerg v. Lingen - Interlocking Coordinator

On 28.02.2024 11:56, Torben Brand wrote:
> Jernbanedirektoratet and Bane NOR need a definition.
>
> Which is the correct enumeration value to use in
> signalIL@function for an "end" markerboard (ETCS) or "end of
> route board" (conventional optical system)? This is always a
> (marker)board that is placed at a buffer stop. See example in the advanced
> example:
> https://railoscope.com/tickets/Fyh1WAZliOQbgVmY?modelId=64d2 293fb1421a4b8096c580&selectId=123-4
>
> Or should a new "other:end" value be introduced?
>
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Definition of Emergency Stop Area for railML 3.3
Next Topic: Reuse IL:SignalBox for Object controllers
Goto Forum:
  


Current Time: Wed Jun 19 15:28:46 CEST 2024