Home » railML newsgroups » railml.rollingstock » Suggestion towards new attributes and sub element for <doors> (<doors>)
Re: Suggestion towards new attributes and sub element for <doors> [message #1840 is a reply to message #1837] Thu, 14 June 2018 10:02 Go to previous messageGo to previous message
Torben Brand is currently offline  Torben Brand
Messages: 158
Registered: March 2016
Senior Member
Thank you, Dirk, for valuable input and good questions.
Jernbanedirektoratet appreciates that you think the suggested extentions are a good idea.

I have to admit that @minimumStopTimeDoors was not good enough defined. I will refine it to:
@minimumStopTimeDoors - technical minimum time of the vehicle between vehicle stops and starts the motion with doors opening fully and closing with no passenger exchange. The value @minimumStopTimeDoors would then be the sum of: @openingTime + time to fully open doors + technical latency time (a system/proccess time) of the vehicle between the doors being fully open and starting to close + @closingTime.

Times mentioned in this extention suggestion are only for rolling stock description.
The following times are not part of the rolling stocks properties and are not meant to be handled here:
• Time used for the departure procedure is not part of any of the times as this is independant of the vehicle (use of flags, lights, GSM-R calls, button on train or on plattform operated by either driver, conductor or dispatcher).
• Passenger flow times are defined as part of <TT:ocpTT/stopDescription/stopTimes @minimalTime> beeing ocp and time (rushhour) dependant. Minimal time available for the passenger exchange would then be = stopTimes @minimalTime - @minimumStopTimeDoors - departure procedure time (not covered by railML so faar)

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Floor height
Next Topic: speedProfile and rolling stock
Goto Forum:
  


Current Time: Sun Apr 28 18:05:27 CEST 2024