| Re: Infrastrukturschema V0.94: (aller)erster Entwurf [message #15 is a reply to message #7] |
Fri, 29 August 2003 14:12  |
Ulrich Linder
Messages: 28
Registered: July 2003
|
Junior Member |
|
|
Hello Mr.Kawabata,
sorry for answering so late.
> 1. In v0.93, we have had elements of "crossover" and
> "junction", but in the newest version, no elements
> for 2 infrastructures. Do you have some reason?
We have a new element "switch" (switchType) which contains all data of the
former "crossover" and "junction".
> 2. There are 2 different type elements for 1
> infrastructure e.g. gauge element and gaugeChange
> element. How should we use properly these elements?
A "gauge" (gaugeType) describes the gauge and is used in the
"infraAttributes" while a "gaugeChange" (gaugeChangeType) is used in the
"trackData" when the gauge changes i.e. on a change-of-gauge station.
> 3. "CrossSection", "border", "switche", "tunnel" and
> "signal" elements have the attributes for their names.
> But other elements e.g. bridge have no attributes
> for names. We hope all elements for 1 unique
> infrastructure have an attribute for its name.
> (Especially bridge, levelCrossing) Could you make
> new attributes for names?
This is planned for the final V0.94
> 4. What is the new element "mileageChange" ?
On our train network we have often mileage changes, especially when the
length of a track changes on construction works. This means that some
mileages are missing or overlapping. The "posType" is used for getting a
unique mileage and the "mileageChange" is used to connect the incoming and
the outgoing mileage.
With best regards
Ulrich Linder
--------------------------------
Dipl.-Ing. Ulrich Linder
Technische Universität Berlin
Fachgebiet Schienenfahrwege und Bahnbetrieb
Sekr. SG 18
Salzufer 17-19
D-10587 Berlin
Tel: +49.30.314-75194
Fax: +49.30.314-25530
Email: mailto:ULinder(at)RailwaysTU-Berlinde
www: http://www.Railways.TU-Berlin.de
|
|
|
|
Members
Search
Help
Login
Home
