Home » railML newsgroups » railML.infrastructure » trainProtection and equipmentUsage
Re: trainProtectionElement, ETCS and balises [message #473 is a reply to message #472] Sun, 02 December 2012 10:22 Go to previous messageGo to previous message
Christian Rahmig is currently offline  Christian Rahmig
Messages: 151
Registered: January 2011
Senior Member
Dear Susanne and other railML users,

> <trainProtectionElement id="tp1" pos="10.0" trainProtectionSystem="PZB90" model="500Hz"/>
> <trainProtectionElement id="tp2" pos="460.0" trainProtectionSystem="PZ80" model="2000Hz"/>
> <trainProtectionElement id="tp3" post="455.0" trainProtectionSystem="ETCS"/>
>
> * PZB90, PZ80 and INDUSI60 are different hardware/software releases at
> the vehicle providing different functionality. The magnets next to the
> rail are the same. de:[1]
>
> Another type for the infrastructure view at the train protection
> elements is needed.

I agree with you and consequently we should throw out all enumaration
values that further define the train protection system. Alternatively, I
suggest to define two separate lists for listing train protection
systems. The first one focuses on the train protection system device
installed to the train and contains the enumeration values as currently
available in "tNationalSystemsType". Maybe we should rename it
"tNationalSystemsTypeForVehicle"? The second list
"tNationalSystemsTypeOnRail" might be shorter because of discarding
values such as 'IndusiXY' and summarizing them to 'PZB'.

> * What to do, if the value 'ETCS' is used? What does it mean?
>
> If it's a balise, the appropriate element 'balise' or 'baliseGroup'
> should be used.
>
> If it's a GSM-R zone, the new element 'trainRadio' should be used
> (attention: currently not implemented).
>
> If it's a border of an ETCS-equipped zone the 'trainProtectionChange'
> element should be used.

In my opinion, the value 'ETCS' should only be used in case I need to
define the position of an ETCS train protection element without knowing
the certain train protection element type (balise, loop, ...).

> [1] http://de.wikipedia.org/wiki/Punktf%C3%B6rmige_Zugbeeinfluss ung

Regards

--
Christian Rahmig
railML.infrastructure coordinator
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: railML2: trackRef@sequence
Next Topic: [railML3] Mapping of tvdSection in infrastructure?
Goto Forum:
  


Current Time: Sun May 05 07:33:14 CEST 2024