Forum: railML.infrastructure » trainProtection and equipmentUsage

Home » railML newsgroups » railML.infrastructure » trainProtection and equipmentUsage

Show: Today's Messages :: Show Polls :: Message Navigator
E-mail to friend

Re: trainProtectionElement, ETCS and balises [message #1879 is a reply to message #480]

Sat, 14 July 2018 17:28

Torben Brand
Messages: 158
Registered: March 2016

Senior Member

trainProtectionChange@nor:type

There is currently no attribute "type" under trainProtectionChange. There is clearly a need as the dormant development page for train protection systems value list shows ( https://wiki.railml.org/index.php?title=Dev:TrainProtectionS ystems).
I strongly disagree to use code. As this is used for national internal systems and for our national UID's. Thus we will add a Norwegian extension with the optional attribute @type with string values.

The same value list is used by trainProtectionElement@trainProtectionSystem. We will not use <trainProtectionElement> in Norway as the physical train protection elements are all part of the balises used in ATC or ERTMS. They are already mapped under <balises>. But as we need to map the transition between the different systems at concrete borders we use <trainProtectionChange> to map those borders.

We will use the values: "none","norD-ATC", "norF-ATC", "ETCS-L2"

I suggest to add this attribute to railML2.4 also. Alternative as an enumeration value from the value list in Dev:TrainProtectionSystems. We ask the infrastructure coordinator to add the value "none" and our national values into the list.

Report message to a moderator

[Message index]

		trainProtection and equipmentUsage By: Andreas Tanner on Thu, 15 March 2012 13:22
		Re: trainProtection and equipmentUsage By: Christian Rahmig on Sun, 18 March 2012 17:17
		Re: trainProtection and equipmentUsage By: Christian Rahmig on Sat, 27 October 2012 19:12
		trainProtectionElement, ETCS and balises (was: trainProtection and equipmentUsage) By: Susanne Wunsch railML on Tue, 27 November 2012 14:44
		Re: trainProtectionElement, ETCS and balises By: Christian Rahmig on Sun, 02 December 2012 10:22
		Re: trainProtectionElement, ETCS and balises By: Dirk Bräuer on Mon, 03 December 2012 09:57
		Re: trainProtectionElement, ETCS and balises By: Torben Brand on Sat, 14 July 2018 17:28
		Adding of trainProtectionSystems for IS:trainProtectionChange and IS:trainProtection By: Tobias Bregulla on Fri, 17 August 2018 09:42
		Re: Adding of trainProtectionSystems for IS:trainProtectionChange and IS:trainProtection By: christian.rahmig on Fri, 03 May 2019 13:29

Previous Topic:	railML2: trackRef@sequence
Next Topic:	[railML3] Mapping of tvdSection in infrastructure?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun May 05 03:45:57 CEST 2024