| Definition of Emergency Stop Area for railML 3.3 [message #3140] |
Sun, 15 October 2023 09:36  |
heidrun.jost@thalesgroup.
Messages: 5
Registered: December 2022
|
Junior Member |
|
|
Dear all,
for railML 3.3 we need the definition of an Emergency Stop Area.
There are two types of Emergency Stop Areas:
1. Conditional Emergency Stop Area // train has to stop if the front end of the train is in rear of the start of the ESA
2. Unconditional Emergency Stop Area //train has to stop in each case
A suggestion would be to use the same definition for Emergency Stop Area like for WorkZone or LocalOperationArea.
However, to use the same approch we must clarify in advance:
What borders are possible for an Emergency Stop Area?
Is at the border in each case a track asset defined (case 1)?
Or is it also possible that the borders are on a pure kilometer value defined without a track asset behind (case 2)?
For case 1 it would be enough to define the Emergency Stop Area only in the interlocking schema, like we did for WorkZone and LocalOperationArea.
For case 2 the definition of the Emergency Stop Area would be necessary in infrastructure (to define the extension) and interlocking schema.
Here an example for an Emergency Stop Area defined only in interlocking schema:
<emergencyStopAreas>
<emergencyStopArea id="IL_Z2MkZDPoiVaqfOJkdtaGyJFa" type="conditional">
<designator register="_costId" entry="EmergencyStopArea:BGS_ESA_BOR"/>
<designator register="_sci_cc" entry="NO_A29_BORESABOR____"/>
<designator register="_longName" entry="BGS_ESA_BOR"/>
<!--commands: NSO, NSOF-->
<hasCommand ref="Z0kA0gRG50Q18PZDDbeIN2Va"/>
<hasCommand ref="IwkLA8DEmOasBk3gMDNTE9"/>
<!--MainSignal:BGS_BOR_L03-->
<isLimitedBy ref="IL_KZZQNdQqiwF0aQBFDe4PNoa"/>
<!--MainSignal:BGS_BOR_M04-->
<isLimitedBy ref="IL_ytQMQbycKIeaAmazUvV8Oa"/>
<!--TrackSection:BGS_BOR_05-->
<trackAssetInArea ref="IL_ZDDQ3u6sLwKfWMciOKX1FFb"/>
<!--Derailer:BGS_BOR_Sp_7-->
<trackAssetInArea ref="IL_Z2QkbTGQeys24OuOVLuzzpb"/>
<!--Point:BGS_BOR_1-->
<trackAssetInArea ref="IL_C547s3mBPL9OU2TFR07IZZ9"/>
<deactivationKey ref="IL_rYAJ3yDJzZD3ZZPqtrAQBKya"/>
<signalWithAspect/>
<!--KeyLockSiding:BGS_BOR_Slas1-->
<keyLockInState id="KL_1">
<givenState>
<relatedLockAndState inState="released">
<refersToKeyLock ref="IL_KN4NRktuSTejZHFEZD66Ae79"/>
</relatedLockAndState>
</givenState>
</keyLockInState>
<levelCrossingInState/>
<releasedForLocalOperation ref="IL_ElkM09NKcKf7UKZZw0dbOTb"/>
</emergencyStopArea>
</emergencyStopAreas>
Therefore the question:
Which borders are possible for Emergency Stop Areas?
Best regards,
--
Heidrun Jost
Data Manager TMS Norway
Transportation Systems
GTS Deutschland GmbH
Phone: +49 (0) 30 688306 423
Schützenstr. 25 10117 Berlin Germany
|
|
|
|
|
|
|
|
Members
Search
Help
Login
Home
