Home » railML newsgroups » railML.infrastructure » Example of Level crossing with own TVD section
Example of Level crossing with own TVD section [message #2953] Fri, 11 March 2022 10:14 Go to next message
Georg Boasson is currently offline  Georg Boasson
Messages: 18
Registered: October 2020
Junior Member
An axle counter may be connected to a level crossing and/or an interlocking system.
Attached is a model of a level crossing which have a TVD section owned by the Level crossing. This TVD section is used to deactivate the level crossing.
Re: Example of Level crossing with own TVD section [message #3020 is a reply to message #2953] Tue, 14 June 2022 14:34 Go to previous message
christian.rahmig is currently offline  christian.rahmig
Messages: 447
Registered: January 2016
Senior Member
Dear Georg,

thank you very much for the document with the example of TVD sections linked with an interlocking and a level crossing. From the code snippet provided on page 2 I conclude that railML 3.2 covers all your requirements for linking the TVD sections. Is that correct or are you missing fundamental information in the model?

If the model is complete, I suggest to add your example as best practice example on the wiki page of either the element <trainDetectionElement> in infrastructure [1] or <tvdSection> in interlocking [2].

[1] https://wiki3.railml.org/wiki/IS:trainDetectionElement
[2] https://wiki3.railml.org/wiki/IL:tvdSection

Best regards
Christian


Christian Rahmig – Infrastructure scheme coordinator
railML.org (Registry of Associations: VR 5750)
Altplauen 19h; 01187 Dresden; Germany www.railML.org
Previous Topic: Definition of Actuators (Point machines) for switches, crossings and derailers
Next Topic: [railML 3] Defining passing points for ATO data
Goto Forum:
  


Current Time: Sun Jun 23 19:01:40 CEST 2024