Home » railML newsgroups » railML.infrastructure » Haltetafel / stop post
Re: Haltetafel / stop post [message #381 is a reply to message #297] Sat, 06 October 2012 11:43 Go to previous messageGo to previous message
Christian Rahmig is currently offline  Christian Rahmig
Messages: 151
Registered: January 2011
Senior Member
Dear railML users,

bringing an (temporary) end to a long discussion about stop posts, the
following solution is going to be implemented with railML 2.2:

The new element <stopPost> is introduced (cp. [1]):

- The element stopPost is defined in a container stopPosts within the
ocsElements object.
- The required parameters id, pos and dir are inherited from the type
tOrientedElement.
- Using the optional parameter platformEdgeRef the stop post can be
referenced with a platform for which it is valid.
- Using the optional parameter validForMovements the train types for
which the stop post is relevant can be defined. The enumeration values
freightTrains, passengerTrains, allTrains and shunting are currently
possible.
- If the stop post is only valid for trains with a certain train length,
the optional parameter trainLength needs to be set.
- If the stop post is only valid for trains with a certain number of
axles, the optional parameter axleCount needs to be set.
- If the stop post is only valid for trains with a certain number of
wagons, the optional parameter wagonCount needs to be set.
- If the stop post is only valid for trains fulfilling a certain verbal
constraint, the optional parameter verbalConstraint needs to be set.
- If the stop post is only a virtual element, which is not physically
represented along the track but only in the operational rules, the
optional parameter virtual needs to be set to true.

The parameter/additional object for referencing train categories as
proposed in [2] hopefully won't be necessary using the optional
parameters above.

[1] https://trac.assembla.com/railML/ticket/167
[2] http://www.railml.org/forum/ro/?group=1&offset=0&thr ead=40&id=110

Regards

--
Christian Rahmig
railML.infrastructure coordinator
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Shown values on mileposts
Next Topic: Steckenunterbruch/line blocking
Goto Forum:
  


Current Time: Thu May 09 03:06:14 CEST 2024