Home » railML newsgroups » railml.interlocking » Clarification on Itineraries
Clarification on Itineraries [message #1759] Thu, 12 April 2018 05:25 Go to next message
Joerg von Lingen is currently offline  Joerg von Lingen
Messages: 64
Registered: May 2011
Member
Dear all,

the use case "Routes for timetable simulation" lists as needed information "Itineraries, i.e. sequence of block
sections". However, it shall be clarified, what the term "itineraries" exactly defines.

1) The term "itineraries" stands for a list of single routes representing the running path of a train from OCP1 to OCPx
through the railway network.

2) The term "itineraries" stands for a list of single routes (within one OCP or on open line) as concatenated ones which
might be activated by the controller/interlocking with one single command.

Please give me your understanding on the term.

Best Jörg.
Interlocking coordinator
Re: Clarification on Itineraries [message #1770 is a reply to message #1759] Thu, 19 April 2018 12:44 Go to previous message
Paolo Girolami is currently offline  Paolo Girolami
Messages: 1
Registered: April 2018
Junior Member
See attached pdf, including a list of definitions and the one we prefer.
Thanks
Regards
Paolo Girolami





Previous Topic: Re: Signal characteristics
Goto Forum:
  


Current Time: Tue Apr 24 04:59:30 CEST 2018