| Visual positionning in step-by-step example [message #1775] |
Wed, 25 April 2018 15:16  |
Sébastien Laroche
Messages: 2
Registered: April 2018
|
Junior Member |
|
|
Hi,
I have looked the simple example Step-by-Step (050118_railML_SimpleExample_v07.zip) for RailML 3.1 and ticket 104. I was wondering how the viewer was able to decide the location of a symbol (above or under a track) or what tells platform 1 and 2 to be between tracks instead of being outside like the other? Is there additional spotLocation data defined elsewhere, other section or the viewer can make other deduction only by the data in the example? Can an infrastructure be rendered only by a LinearPositionSystem or we need at least one screenPositioningSystems?
Have a great day.
[Updated on: Wed, 07 June 2023 16:34] by Moderator Report message to a moderator |
|
|
|
| Re: Visual positionning in step-by-step example [message #1779 is a reply to message #1775] |
Mon, 30 April 2018 16:21  |
christian.rahmig
Messages: 436
Registered: January 2016
|
Senior Member |
|
|
Dear Sebastian,
welcome to the railML forum!
Am 25.04.2018 um 15:16 schrieb Sébastien Laroche:
> Hi,
> I have looked the simple example Step-by-Step
> (050118_railML_SimpleExample_v07.zip) for RailML 3.1 and
> ticket 104. I was wondering how the viewer was able to
> decide the location of a symbol (above or under a track) or
> what tells platform 1 and 2 to be between tracks instead of
> being outside like the other? Is there additional
> spotLocation data defined elsewhere, other section or the
> viewer can make other deduction only by the data in the
> example? Can an infrastructure be rendered only by a
> LinearPositionSystem or we need at least one
> screenPositioningSystems?
> Have a great day.
>
The Simple Example described in the tutorial is missing information
about the lateral position of an element with reference to the
underlaying topology.
(Please note: the following example refers to Simple Example
visualization v0.7 distributed with the Tutorial document 1.0, because
that's the one you used, right? In the meantime, there is already a v0.8
from January 22, 2018, distributed with the Tutorial document 1.1)
So, the platform edge "2" in "Bf Arnau" (right side of NetElement
"ne01") should look like this:
<platformEdge id="ple01" height="550">
<linearLocation id="ple01_lloc01" applicationDirection="both">
<associatedElement netElementRef="ne_a01" intrinsicCoordBegin="0.2"
intrinsicCoordEnd="0.6" keepsOrientation="true">
<linearCoordinateBegin measure="100.0"
positioningSystemRef="lps01" lateralOffset="1.7"/>
<linearCoordinateEnd measure="300.0" positioningSystemRef="lps01"
lateralOffset="1.7"/>
</associatedElement>
</linearLocation>
<name name="2" language="de"/>
<length type="physical" value="200.00" validForDirection="both"/>
</platformEdge>
And the platform edge "2" in "Bf Cstadt" (left side of NetElement
"ne01") should look like this:
<platformEdge id="ple03" height="550">
<linearLocation id="ple03_lloc01" applicationDirection="both">
<associatedElement netElementRef="ne_b01" intrinsicCoordBegin="0.4"
intrinsicCoordEnd="0.8" keepsOrientation="true">
<linearCoordinateBegin measure="4700.0"
positioningSystemRef="lps01" lateralOffset="-1.7"/>
<linearCoordinateEnd measure="4900.0"
positioningSystemRef="lps01" lateralOffset="-1.7"/>
</associatedElement>
</linearLocation>
<name name="2" language="de"/>
<length type="physical" value="200.00" validForDirection="both"/>
</platformEdge>
We will foresee this modification in the next update of the Simple Example.
Regarding your question about the rendering, I would like to hear the
answers from the users: some of them may tell that it is possible to
visualize a railway network just on the basis of the described topology
while others will insist on requiring screen coordinates. The railML
format thus is open to model it both ways depending on the needs. Which
of the solutions do you prefer?
Best regards
Christian
--
Christian Rahmig - Infrastructure scheme coordinator
railML.org (Registry of Associations: VR 5750)
Phone Coordinator: +49 173 2714509; railML.org: +49 351 47582911
Altplauen 19h; 01187 Dresden; Germany www.railml.org
Christian Rahmig – Infrastructure scheme coordinator
railML.org (Registry of Associations: VR 5750)
Altplauen 19h; 01187 Dresden; Germany www.railML.org
|
|
|
|
|
|
| Re: Visual positionning in step-by-step example [message #3103 is a reply to message #1787] |
Mon, 03 July 2023 17:16 |
Larissa Zhuchyi
Messages: 31
Registered: November 2022
|
Member |
|
|
Dear all
This a gentle reminder that because of a constant process of changes and fixes, currently, the example of version 11 is published at railML.org [1].
Since the 7th version, we added some more kilometer values, axle counters, speed signalling and many more (see changelog).
Please keep in mind that version 11 does not incorporate all the recent developments either. These are coming in the next version. Also, we acknowledge that as of summer 2023 the example data of railML 3.2 is missing, but we will do our best to provide it as soon as possible.
[1] https://www.railml.org/en/user/exampledata.html
Sincerely,
Larysa Zhuchyi
Larissa Zhuchyi – Ontology Researcher
railML.org (Registry of Associations: VR 5750)
Altplauen 19h; 01187 Dresden; Germany www.railML.org
|
|
|
|
Members
Search
Help
Login
Home
