Home » railML newsgroups » railml.interlocking » Code list trainProtectionSystems
Code list trainProtectionSystems [message #2172] Fri, 12 April 2019 14:55 Go to next message
Janne Möller is currently offline  Janne Möller
Messages: 14
Registered: March 2019
Location: Oslo
Junior Member
Dear railML-community,

Concerning the attribute @trainProtectionSystem we kindly ask for the associated code list [1] to be extended by values we would like to use in the norwegian sector.
This concerns the following:

1. DATC
That means delvis (=partial) ATC which monitors the passing of red lights by the trains.

2. FATC
That means fullstendig (=full) ATC which additionally to the red light supervision monitors the maximum speed of the track to not be exceeded.

3. ETCS Level 2

I could see from the current codelist that DATC is already a value in there. As there is no further description I am wondering if it has the same meaning as the above-mentioned DATC. Also in the list there is ATC but it is commented out.
As for ETCS Level 2, the train protection system ETCS can be found in the code list but with no further specification of the level. It would be nice to be able specify level 2.

[1] https:// svn.railml.org/railML2/trunk/codelists/TrainProtectionSystem s.xml

Kind regards,
Janne Möller
Re: Code list trainProtectionSystems [message #2205 is a reply to message #2172] Sun, 16 June 2019 08:25 Go to previous message
Joerg von Lingen is currently offline  Joerg von Lingen
Messages: 148
Registered: May 2011
Senior Member
<trainProtectionSystem code="DATC">
<name>delvis Automatic Train Protection</name>
</trainProtectionSystem>
<trainProtectionSystem code="ETCS-L2">
<name >European Train Control System (ERTMS), Level 2</name>
</trainProtectionSystem>
<trainProtectionSystem code="FATC">
<name>full Automatic Train Protection</name>
</trainProtectionSystem>

added with commit [990]

Best regards,
Joerg v. Lingen - Interlocking Coordinator

Am 12.04.2019 um 14:55 schrieb Janne Möller:
> Dear railML-community,
>
> Concerning the attribute @trainProtectionSystem we kindly
> ask for the associated code list [1] to be extended by
> values we would like to use in the norwegian sector.
> This concerns the following:
>
> 1. DATC
> That means delvis (=partial) ATC which monitors the passing
> of red lights by the trains.
>
> 2. FATC
> That means fullstendig (=full) ATC which additionally to the
> red light supervision monitors the maximum speed of the
> track to not be exceeded.
>
> 3. ETCS Level 2
>
> I could see from the current codelist that DATC is already a
> value in there. As there is no further description I am
> wondering if it has the same meaning as the above-mentioned
> DATC. Also in the list there is ATC but it is commented
> out.
> As for ETCS Level 2, the train protection system ETCS can be
> found in the code list but with no further specification of
> the level. It would be nice to be able specify level 2.
>
> [1]
> https://svn.railml.org/railML2/trunk/codelists/TrainProtecti onSystems.xml
>
> Kind regards,
> Janne Möller
Previous Topic: Extension of tElementWithIDandDesignator and additional elementNumber
Next Topic: Defining the limits of RestrictedArea
Goto Forum:
  


Current Time: Tue Jul 23 14:29:29 CEST 2024