Home » railML newsgroups » railml.infrastructure » [railML3.1|Simple Example] Errors
[railML3.1|Simple Example] Errors [message #1871] Fri, 06 July 2018 14:58 Go to next message
Felix Prüter is currently offline  Felix Prüter
Messages: 28
Registered: June 2016
Location: Berlin
Junior Member
Dear all,
validating the Simple Example xml for railML v3.1 raised a list of errors:
  • elements called *Ref (like platformRef) are used but not allowed by the schema (the corresponding element is written w/o the Ref suffix)
  • etcsSignal (element of signal) should be etcs conforming to the schema
  • speedSignal (element of signal) is not allowed by the schema at all, although mentioned in the corresponding html documentation in the SVN [1] --> clash between xsd and UML model / documentation?
[1] https://svn.railml.org/railML3/tags/railML-3.1-beta

Kind regards


--
Felix Prüter
SIGNON Deutschland GmbH
Re: [railML3.1|Simple Example] Errors [message #1891 is a reply to message #1871] Mon, 06 August 2018 16:04 Go to previous messageGo to next message
christian.rahmig is currently offline  christian.rahmig
Messages: 173
Registered: January 2016
Senior Member
Dear Felix,

again I am little bit confused about the source of data you used.
However, I am going to investigate on this and let you know about my
findings.

Best regards
Christian

Am 06.07.2018 um 14:58 schrieb Felix Prüter:
> Dear all,
> validating the Simple Example xml for railML v3.1 raised a
> list of errors:
> elements called *Ref (like platformRef) are used but not
> allowed by the schema (the corresponding element is written
> w/o the Ref suffix) etcsSignal (element of signal) should be
> etcs conforming to the schema speedSignal (element of
> signal) is not allowed by the schema at all, although
> mentioned in the corresponding html documentation in the SVN
> [1] --> clash between xsd and UML model / documentation?
> [1] https://svn.railml.org/railML3/tags/railML-3.1-beta
>
> Kind regards


--
Christian Rahmig - Infrastructure scheme coordinator
railML.org (Registry of Associations: VR 5750)
Phone Coordinator: +49 173 2714509; railML.org: +49 351 47582911
Altplauen 19h; 01187 Dresden; Germany www.railml.org
Re: [railML3.1|Simple Example] Errors [message #1914 is a reply to message #1891] Fri, 17 August 2018 12:58 Go to previous messageGo to next message
Felix Prüter is currently offline  Felix Prüter
Messages: 28
Registered: June 2016
Location: Berlin
Junior Member
Dear Christian,
the example file I investigated is named railML_SimpleExample_railML3-1-beta_171211.xml.

But I agree that this does not fit to the model version I referenced in the opening post.

Seems that I mixed things up.

I will check the ostensible errors in the latest version (trunk of rev818).


--
Felix Prüter
SIGNON Deutschland GmbH
Re: [railML3.1|Simple Example] Errors [message #1957 is a reply to message #1914] Fri, 07 September 2018 09:01 Go to previous message
Felix Prüter is currently offline  Felix Prüter
Messages: 28
Registered: June 2016
Location: Berlin
Junior Member
Dear Christian, dear all,
sorry for the confusion.
I checked the latest example file called railML.org_SimpleExample_v10_railML3-1_01.xml in rev834.
Of course, the validation against the corresponding schema files succeeded w/o errors.


--
Felix Prüter
SIGNON Deutschland GmbH
Previous Topic: Hierarchy of overlaying speed profiles and National vs. Generic speed profiles.
Next Topic: Marking @frontier and @chargeFrontier as DEPRECATED?
Goto Forum:
  


Current Time: Thu Oct 18 07:46:33 CEST 2018