Home » railML newsgroups » railml.infrastructure » Map infrastructure to a country
Map infrastructure to a country [message #1788] Fri, 04 May 2018 14:14 Go to next message
Mark Lorenz is currently offline  Mark Lorenz
Messages: 2
Registered: May 2018
Junior Member
Hi,

I am working on a tool for vehicle planning. Some vehicles may not have the ability to drive on tracks that are located in different countries.

Is it possible to add attributes which show the country within the OCPs or Tracks? Same problems appear with different infrastructure attribute, namely electricity and such things. So is it possible to add some attributes which help to choose the right vehicle for a special track? (currently using RailML 2.2 or 2.3).

Or do I have to wait for 3.1? Smile

Greets Mark
Re: Map infrastructure to a country [message #1789 is a reply to message #1788] Sat, 05 May 2018 08:24 Go to previous messageGo to next message
Tobias Bregulla is currently offline  Tobias Bregulla
Messages: 11
Registered: June 2017
Junior Member
Hello,

welcome to the forum. Nice that the Verkehrsautomatisierung Berlin is
also active here.

The selection of the right vehicle for a special infrastructure (e.g.
track) should be the task of the processing software (e.g. tools for
vehicle planning), right? railML can only model and map data, a decision
should always be made by the processing software.

In railML 2.x it is possible to specify the infrastructure operator via
the <infrastructureManager> code list, a list can be found at
https://wiki.railml.org/index.php?title=Dev:InfrastructureMa nagers.
Where the corresponding registration of the vehicle is modeled, I cannot
say, since I work exclusively in the infrastructure area.

The same applies to properties such as electrification: Compare and
decide on the infrastructure property
(https://wiki.railml.org/index.php?title=IS:electrification) and the
vehicle property (https://wiki.railml.org/index.php?title=RS:tractionMotor).

Waiting for railML 3.x should not be necessary, the current railML 2.x
(and maybe some minor extensions) should sufficient.

Best regards,

Tobias Bregulla (Bahnkonzept Dresden)

Am 04.05.2018 um 14:14 schrieb Mark Lorenz:
> I am working on a tool for vehicle planning. Some vehicles
> may not have the ability to drive on tracks that are located
> in different countries.
>
> Is it possible to add attributes which show the country
> within the OCPs or Tracks? Same problems appear with
> different infrastructure attribute, namely electricity and
> such things. So is it possible to add some attributes which
> help to choose the right vehicle for a special track?
> (currently using RailML 2.2 or 2.3).
>
> Or do I have to wait for 3.1? :)
Re: Map infrastructure to a country [message #1790 is a reply to message #1789] Mon, 07 May 2018 09:36 Go to previous messageGo to next message
Mark Lorenz is currently offline  Mark Lorenz
Messages: 2
Registered: May 2018
Junior Member
Thanks Tobias, your information concerning the <InfrastructureManagers> and the <electrification> attributes help me a lot.
Re: Map infrastructure to a country [message #1792 is a reply to message #1790] Wed, 09 May 2018 15:08 Go to previous message
Joerg von Lingen is currently offline  Joerg von Lingen
Messages: 67
Registered: May 2011
Member
Hi,

just for correction: The electrification data of a vehicle is included in Propulsion
(https://wiki.railml.org/index.php?title=RS:propulsion). Any data of TractionMotor are internal for the vehicle.

At the moment there is only https://wiki.railml.org/index.php?title=RS:operator for basic operator data but there is no
list or mapping for which infrastructure manager the vehicle is licensed. If you need such information in RS please open
a ticket with a proposal of what information is needed.

Mark Lorenz wrote on 07.05.2018 09:36:
> Thanks Tobias, your information concerning the
> <InfrastructureManagers> and the <electrification>
> attributes help me a lot.
>
Previous Topic: Visual positionning in step-by-step example
Next Topic: Include track length information in topology
Goto Forum:
  


Current Time: Mon May 28 05:06:32 CEST 2018