Home » railML newsgroups » railml.timetable » [Request for railML3] Different station tracks in one <ocpTT> for different <operatingPeriod>s
[Request for railML3] Different station tracks in one <ocpTT> for different <operatingPeriod>s [message #1339] Fri, 15 January 2016 14:30 Go to previous message
Christian Rößiger is currently offline  Christian Rößiger
Messages: 60
Registered: March 2015
Member
Hello everyone,

For railML 3 we suggest to extent the possibilies for modelling stop
information in a way, that different kinds of stops can be modelled
within the same <ocpTT> instance distinguished by its operating periods.
Primarily, this affects a different station track usage (trackRef,
serviceSection, platformEdge, etc.), but also other attributes e.g.
commercial vs. operational stop, onOff, etc. Cancellation of a stop on a
subset of the total operating days (which is already now possible with
the stopDescription.operatingPeriodRef attribute) should also be
included in the new structure.
Arrival and departure times should not be separated into different
operation periods because this would most likely affect the times of the
previous or following <ocpTT>. For this reason, modelling of multiple
kinds of stops is only possible, if arrival and departure times are
identical on all operating days.

--- German translation ---
für railML 3 schlagen wir vor, die Möglichkeiten der Abbildung von
Halteinformationen so zu erweitern, dass innerhalb einer ocpTT-Instanz
unterschiedliche Haltearten separiert nach Verkehrstagen abgebildet
werden können. In erster Linie betrifft dies die unterschiedliche
Bahnhofs-Gleisnutzung (trackRef, serviceSection, platFormEdge, etc.),
aber auch andere Eigenschaften, wie kommerzieller vs. Betriebshalt, nur
Ein-/Aussteigen, usw. Auch ein Halteausfall an einer Teilmenge der
Gesamtverkehrstage (derzeit schon mittels
stopDescription.operatingPeriodRef möglich) sollte mit Hilfe dieser
neuen Struktur abbildbar sein.
Ankunfts- und Abfahrtszeiten sollten nicht nach Verkehrstagen separiert
werden, da dies höchstwahrscheinlich auch die Zeiten der benachbarten
<ocpTT> beeinflussen würde. Aus diesem Grund ist die Abbildung mehrerer
Haltearten innerhalb der gleichen <ocpTT> nur möglich, wenn Ankunfts-
und Abfahrts-Zeiten identisch sind.

Kind regards,
Christian Rößiger

--
iRFP e. K. · Institut für Regional- und Fernverkehrsplanung
Hochschulstr. 45, 01069 Dresden
Tel. +49 351 4706819 · Fax. +49 351 4768190 · www.irfp.de
Registergericht: Amtsgericht Dresden, HRA 9347
 
Read Message
Read Message
Read Message
Read Message
Previous Topic: DepartureDay / ArrivalDay at first <ocpTT> of a train run
Next Topic: stopDescription: New enumeration value 'none' for attribute onOff in railML 2.4
Goto Forum:
  


Current Time: Wed Apr 24 08:10:17 CEST 2024