Home » RailTopoModel newsgroup » RailTopoModel » Relation multiplicity AssociatedNetElement to PositionedNetElement (See class diagram OrderedAssociatedNetElement in the model)
Relation multiplicity AssociatedNetElement to PositionedNetElement [message #1419] Tue, 13 September 2016 19:22 Go to next message
Regina Klimmek is currently offline  Regina Klimmek
Messages: 1
Registered: September 2016
Junior Member
Dear all!

LinearLocations and AreaLocations both comprise one or more AssociatedNetElements to refer to the network. Each of those AssociatedNetElements refers to one or more PositionedNetElements.

But look at the AssociatedNetElement's parameters intrincicCoordBegin, intrinsicCoordEnd (both in the [0,1] interval) and keepsOrientation (boolean). How should the intrinsic coordinate refer to several PositionedNetElements? How can one AssociateNetElement keep the orientation of, say, two PositionedNetElements oriented reversely to each other?

The positioning works perfectly well if each AssociatedNetElement has one and only one PositionedNetElement. What is the intention of more than one?

Are the several PositionedNetElements belonging to distinct levels? Needs some explanation.

Best regards,

Dr. Regina Klimmek
IDM Strategie
Informationssysteme Infrastrukturdaten (I.NVI 1)

DB Netz AG
Weilburger Str 22, 60326 Frankfurt
____________________________________________________________ _____________________
Der DB-Konzern im Internet >> http://www.deutschebahn.com

Sitz der Gesellschaft: Frankfurt am Main
Registergericht: Frankfurt am Main, HRB 50879
USt-IdNr.: DE 199861757
Vorstand: Frank Sennhenn (Vorsitzender), Dr. Roland Bosch, Bernd Koch, Ute Plambeck, Prof. Dr. Dirk Rompf, Dr. Thomas Schaffer
Vorsitzender des Aufsichtsrates: Dr. Rüdiger Grube

[Updated on: Tue, 13 September 2016 20:38] by Moderator

Report message to a moderator

Re: Relation multiplicity AssociatedNetElement to PositionedNetElement [message #1422 is a reply to message #1419] Fri, 07 October 2016 10:40 Go to previous message
Alain Jeanmaire is currently offline  Alain Jeanmaire
Messages: 8
Registered: January 2016
Junior Member
Dear Regina,
thank you for your analysis, and contribution to improve the quality of RTM model

on behalf of Gilles Dessagne,

This is effectively an error in the current version of model.
The cardinality toward PositionningNetElement should be 1 and not 1..*.

The correction is under work.

Best regards
Alain Jeanmaire
SNCF Réseau

[Updated on: Fri, 07 October 2016 10:46] by Moderator

Report message to a moderator

Previous Topic: Redundant attribute description table
Next Topic: Ordered LinearAnchorPoints?
Goto Forum:
  


Current Time: Thu May 25 07:06:57 CEST 2017